FAQ
How do I clean my pipe?
For cleaning your pipe, you’ll need a zipper-lock bag, isopropyl alcohol, and coarse salt.
1. Scrape out any debris from the bowl with a pointy tool.2. Place the pipe in a zipper-lock bag. Pour in enough isopropyl alcohol to submerge the pipe and add a couple tablespoons of coarse salt.
3. Seal the bag and shake the contents vigorously until all gunk is removed from the pipe. Shake it, don’t break it!
4. Rinse the pipe thoroughly under warm water, making sure the cleaning solution is completely flushed out from inside.
5. Remove any stubborn particles with a pipe cleaner or cotton swab dipped in isopropyl alcohol, making sure to rinse again afterwards. Repeat as necessary.
How do I clean my water pipe?
For cleaning your bong, you’ll need a zipper-lock bag, isopropyl alcohol, and coarse salt, cling film and rubber bands.
TIP: We recommend emptying and rinsing your bong after each session. Dirty water promotes build-up and funks up the flavor of your flower.
1. Scrape out any debris from the bowl with a pointy tool. Remove the bowl from the bong and remove the silicone gasket.2. Place the bowl in a zipper-lock bag. Pour in enough isopropyl alcohol to submerge the bowl and add a couple tablespoons of coarse salt.
3. Seal the bag and shake the contents vigorously until all gunk is removed from the bowl. Shake it, don’t break it!
4. Rinse the pipe thoroughly under warm water, making sure the cleaning solution is completely flushed out from inside.
5. Remove any stubborn particles with a pipe cleaner or cotton swab dipped in isopropyl alcohol, making sure to rinse again afterwards. Repeat as necessary.
6. After cleaning the bowl and rubber silicone gasket, fill the bong with isopropyl alcohol, about as much as you’d normally fill it with water, and a few tablespoons of coarse salt.
7. Cover the two openings tightly with cling film, securing the film with rubber bands so it won’t leak.
8. Shake and swirl the liquid inside the bong until all gunk is removed.
9. Rinse the bong thoroughly under warm water, making sure the cleaning solution is completely flushed out from inside.